Community discussion forum
Introduction to TCP/IP
-
This thread is for discussions of Introduction to TCP/IP.
-
Advertisement
Simply the fastest line-level profiler for .NET ever
“The low overhead means it has minimal impact on the execution of my program”
Mark Everest, Development Team Leader, Renault F1 Team Ltd.Try out the new ANTS Profiler 4 for yourself. Download your 14-day trial now
-
i created a client/server application using winsock, and everything works fine except if i try to send a message to all the clients from the server, only the last client actually recieves the message. after much research i found the service pack 4 for VB resolves this issue...but it only resolved the issue if i use my computer (that has VB) as the server.... i need to use a computer that does not have VB to be the server. Can anyone help me!!!!!
-
How are you broadcasting? Are you using TCP/IP or UDP? I have sent broadcast messages using UDP just by using the broadcast address 255.255.255.255 so that the packet goes everywhere. I had problems prior to using this when the PC's were in different domains. I dont know if this helps!
-
I am a new member and my question might have been asked before but i can not find it in the archives.
But if anyone would be able to help, please do. I would be greatful.
Q: I have to create a (http like) protocol to enable the client communicate with a server. I know the basics but would be greatful for any ideas. Thanks -
5 years agoby
mstefan
Mike Stefanik
California, United States, United StatesJoined 5 years agoIf you're using SocketWrench, there's an HTTP client and server example that's included that could probably serve as a foundation for what you're interested in doing. If you have any specific questions, I'd be happy to answer them for you.
-
I only speak a lite bit of English
I need to know the name of the file on Windows to define a
new LocalPort (UDP port) for a new application (Client/Server) of
Files.
Mi lenguaje es el Castellano.
Thanks Javier -
Hi...
im new to tcp programming using winsock control in Vusual Basic.
i tried a client server chat program, in which there is a client program running and its
communicting with a server program. when i tried with two clients communicating thru a server program..its not working...can you help me....please send the source code also..
By
Faisal -
I ran into this problem a long time ago, what you need to do is throw in a DoEvents call in the place where your server is handling the incomming and outgoing traffic. I haven't made anything like that for awhile, but I'm pretty sure you do it in your loops, like:
example:
for each.. blah blah
Winsock1.SendData blah
DoEvents
end for -
Hi. I read ur message. I'm doing a (socket programming) chatty client/server messenger program too and I need lots of help. I heard you have done it. Could u send me ur source code and i could refer to it. Thanks alot it will help me greatly. By the way i'm using tcp.
-
there would b two applications one will be at server the other will be at client side
i m sending this code asuming that u have some prior knowledge about network programming
include this code at server side
Private Sub listen_Click()
Winsock1.LocalPort = 1002
Winsock1.listen
End Sub
Private Sub cmdsend_Click()
Winsock1.SendData chattxtbox.Text
txtwindow.Text = txtwindow.Text & vbNewLine & chattxtbox.Text
chattxtbox.Text = ""
txtwindow.SelStart = Len(txtwindow)
End Sub
Private Sub Winsock1_ConnectionRequest(ByVal requestID As Long)
Winsock1.Close
Winsock1.Accept requestID
End Sub
Private Sub Winsock1_DataArrival(ByVal bytesTotal As Long)
Dim txtwindowdata As String
Winsock1.GetData txtwindowdata
txtwindow.Text = txtwindow.Text & vbNewLine & txtwindowdata
txtwindow.SelStart = Len(txtwindow)
End Sub
//include this one at client siderivate Sub cmdconnect_Click()
Winsock1.RemoteHost = "127.0.0.1"
Winsock1.RemotePort = 1002
Winsock1.Connect
End Sub
Private Sub cmdsend_Click()
Winsock1.SendData chattxtbox.Text
rectxtwindow.Text = rectxtwindow.Text & vbNewLine & rectxtwindow.Text
chattxtbox.Text = ""
End Sub
Private Sub Winsock1_DataArrival(ByVal bytesTotal As Long)
Dim txtfromserver As String
Winsock1.GetData txtfromserver
rectxtwindow.Text = rectxtwindow.Text & vbNewLine & txtfromserver
rectxtwindow.SelStart = Len(rectxtwindow)
End Sub
Private Sub Winsock1_Connect()
MsgBox "Connecting to Server....Plz stay far n WAIT"
End Sub
this will make a client server chat applicatin with in a LAN -
Hi,
Iam developing the socket application.In this the remote host is sending messages.But iam not able to pick all the messages sent by the remote host.If remote is sending 10 msgs,then iam able to pick 2 or 3 msgs.pls tell me,what could be the reason for that asap.
Thank you. -
hi i want to make socket connection for the multiple clients like i want to send the data to the server to the multiple clients how i will be able to do that. IS there anybody else who can help me. I am able to do that by socket programming but only in single system when i want to do that on multiple system then it is not possible.is there any one? its very needed.................................... thanks and bye
-
hi
This is possible using threads in the client program. the client can generate parallel connections using threads. so u can create multiple clients in the same system.
In the server side, you use two sockets. One for receive the data and another for response to corresponding clients. Use the FDSET, FDISSET functions to achieve this apps. This is reliable one
Hope I may answered your question.
Karthik
Post a reply
Quick links
Recent activity
- chandradev prasad replied to "how to implement varifiact...
- ania g replied to IT Service Desk Analyst
- Jayalakshmi Sanathkumar replied to Taking a long time to Stop ...
- Anjali Thakur replied to Installing windows service ...
- Colm Fitzgerald replied to Reading a weighing scale th...
- Vinod Narayan replied to Structured QA on Budget
Enter your message below
Sign in or Join us (it's free).